Products

Lyle Signs, Inc offers a wide variety of products. Many of our products are based on the specifications provided in the Manual on Uniform Traffice Control Devices (MUTCD) 2009 Edition. 

View the MUTCD manual for more information or the Standard Highway Signs Manual. View the List of Known Errors in the 2009 MUTCD.

View the MUTCD Information by State.

View the changes between the 2003 Edition to the 2009 Edition

Lyle Signs will also make traffic and control signs to state specifications. You can view some of the State Manuals by using the following links.

Minnesota MN Sign Summary
Wisconsin

For more detailed information, please see our product menu.

3M™ Reflective Sheetings & Sign Materials

Good Visibility Means Safety

At night, it's critical that signs are highly visible. They need to perform in rural areas and brightly-lit city streets as well. For these conditions, 3M™ developed reflective sheetings. These highly reflective materials are designed for high visibility day or night. High-performance sheetings are durable, performing year after year, providing maximum value and cost-effectiveness

For more information, please contact your Lyle Signs representative.

Reflectivity Comparison 

Studies show that brighter signage improves roadway safety. For more information view the high intensity reflectivity flyer and the 3M Maintaining Traffic Sign Retroreflectivity flyer.

3M™ Diamond Grade Reflective Sheeting

3M™ Hi Intensity Prismatic (HIP) Reflective Sheeting

3M™ Engineer Grade Reflective Sheeting

Diamond Grade Reflective Sheeting is a cube corner reflective sheeting which is brighter than the prismatic reflective sheeting and ten times brighter than enclosed lens sheeting. This means greater visibility for drivers in all roadway conditions. It performs at entrance angles up to 60 degrees, allowing wide flexibility in sign placement. Diamond Grade Sheeting provides the brightest reflective performance of any durable sign sheeting available.

Ask us about the new DG3 Sheeting.

High Intensity Prismatic Sheeting is a durable prismatic sheeting which is designed to be at least three times brighter than Engineer Grade sheeting when new. What's more, it is guaranteed to retain at least 80% of that original brightness after 10 years on the roadway. HIP Sheeting is clearly visible, even at wide angles to the sign and in lighted areas, warning drivers effectively of upcoming road hazards.

Engineer Grade Reflective Sheeting is a durable enclosed lens material used successfully on traffic signs since the early 1950s. It continues to be used in areas with light traffic and slower speeds.

Back to Top

Sign Materials

Sheeting Rolls: Rolls of reflective and non-reflective sheeting are available in standard widths of:

  • 6" wide x 50 yards
  • 12" wide x 50 yards
  • 18" wide x 50 yards
  • 24" wide x 50 yards
  • 30" wide x 50 yards
  • 36" wide x 50 yards
  • 48" wide x 50 yards

Choose from white, yellow, blue, green, red, orange, brown or black. Pressure-sensitive adhesive.

For more information, please contact your Lyle Signs representative.

Sign Blanks:   Available in varying thickness of aluminum or plastic. Available in any shape: octagon, triangle, square, diamond, rectangle, circle, pentagon or pennant.

Sign Faces: Pressure-sensitive. Available with standard or special messages.

Back to Top

Conspicuity Sheeting

Light up your trucks, trailers and public works vehicles at night with conspicuity sheeting. 3M™ Scotchlite™ Diamond Grade Conspicuity Sheeting Series 981 is a highly retroreflective prismatic sheeting designed to mark the sides and rear of vehicles for enhanced visibility and detection. The reflectivity allows approaching drivers to see your vehicle far in advance.

Studies show that heavy trucks marked with reflective sheeting experience 20% fewer night time collisions.

  • Available in 2", 3" and 4" by 50 yard rolls
  • Choose from red and white, solid white, solid yellow or solid red.

Partner Products

3M™ Reflective Sheetings Street Name Signs Bright Backgrounds/Bright Signs

Life Cycle Costs and Value Signs for the Disabled School Zone Safety

Safety on Rural Roads Sight Distance Bicycle Routes

Reflectivity / Entrance or Observation Angle / Luminance

3M™ Reflective Sheetings

3M™ Diamond Grade™ Reflective Sheeting: Diamond Grade reflective sheeting is a cube corner reflective sheeting which is at least three times brighter than encapsulated lens sheeting and up to ten times brighter than enclosed lens sheeting. This means greater visibility for drivers in all roadway conditions. It performs at entrance angles up to 60 degrees, allowing wide flexibility in sign placement. Diamond Grade provides the brightest reflective performance of any durable sign sheeting available.

3M™ Engineer Grade Reflective Sheeting: Engineer Grade reflective sheeting is a durable enclosed lens material used successfully on traffic signs since the early 1950's. It continues to be used in areas with light traffic and slower speeds.

3M™ Hi Intensity Grade Prismatic Reflective Sheeting (HIP): High Intensity Grade reflective sheeting is used on durable traffic control signs, work zone signs and delineators. It is available in vivid daytime colors and also in pre-striped orange and white for all your barricade needs 3M™High Intensity Prismatic Reflective sheeting meets multiple specifications.

Back to top

Street Name Signs

Street SignAs our driving population ages, the need for street name signs that provide greater visibility increases-particularly at night. Tourists and other drivers unfamiliar with the area must see street name signs in order to find their way to hotels, restaurants and homes.

Drivers of ambulances and other emergency vehicles also depend on highly visible street name signs in order to reach their destinations quickly - particularly when any delay can be critical.

 Street Sign Lettering: Street Sign InformationLettering on street name signs should be at least 150 mm (6 inches) high in capital letters or 150 mm (6inches) upper case with 110 mm (4-1/2 inches) lower case letters.

 

Budget Concerns: Budget issues can be resolved by including street names signs funding in 9-1-1 programs with enhanced systems, street name sign costs should be recovered through funds allotted to the address tracking portion of the telephone system. And with non-enhanced systems, signage may be paid for as a non-recurring cost, with surplus funds recovered from the telephone bill surcharge.

However your community funds improve street signs, it's important to spend those dollars wisely, making sure new signage provides rescue drivers with truly effective guidance. Our street signs deliver the visibility needed, with the superior brightness and angularity that comes from using the very best materials.

When you purchase our signs you get the most reliable and effective reflective signs made. That's because we use 3M™ Reflective Sheetings.

Back to top

Bright Backgrounds/Bright Signs

Night Time Stop ImageSigns in urban areas must be able to compete with streetlights, commercial signs and oncoming headlights for the motorist's attention.

Studies have found that drivers need signs which are 10 times brighter in bright urban surroundings than in rural areas.

To meet these specifications of urban and suburban areas, you should look for signs that are bright enough - and will stay bright enough to compete with the light of your city. We can promise you that, because we make signs using only the best material.


High Intensity Grade Sheeting from 3M

  • 3 times brighter than conventional, enclosed lens sheeting.
  • Guaranteed to retain 80% of its initial specified reflectivity after ten years.

Diamond Grade™ Sheeting from 3M

  • 10 times brighter than enclosed lens sheeting.
  • Guaranteed to retain 50% of is initial, specified reflectivity after seven years.

These 3M reflective products perform at wide viewing angles so that even poorly aligned signs will alert the motorist on your streets and roads. Plus they are backed by 3M's exclusive replacement warranty.

When you purchase our signs you get the most reliable and effective reflective signs made. That's because we use 3M™ Reflective Sheetings.

Back to top

Life Cycle Costs and Value

Maintenance costs must be evaluated. Signs should perform over extended periods of time, to justify their cost and the cost of labor to install them. By purchasing signs that will retain their brightness for years to come, you can save maintenance dollars down the road. By purchasing signs that perform at wide viewing angles, you can provide drivers with signs that can be seen even if improperly installed or misaligned. This means an added margin of safety.

Back to top

Signs for the Disabled

It is important to provide the disabled with access to facilities that equals the access provided to others. It is equally important to mark these access areas so they can be easily located by those who need them.

Proper signs can alert the physically challenged to reserved parking spaces, drop-off zones, ramps, entrances and other places accessible to disabled people.

Signs for the disabled must have several important characteristics:

  • The universal disabled symbol must be prominently displayed and easily recognized on signs.
  • Signs must be large enough to be seen quickly amidst the visual clutter typical of urban areas.
  • Signs must be bright and easily seen at night as well as during daylight hours.
  • Signs must retain brightness over time to remain effective.

We can provide signs that clearly identify areas reserved for the physically challenged, with long-lasting brightness that stands out even in the dark.
Our signs are made from 3M™ Reflective Sheeting.

Back to top

School Zone Safety

To better protect our children, the areas where they walk should be well-signed and marked in accordance with the Manual on Uniform Traffic Control Devices (MUTCD).

School Signs Purposes

  • School advance signs warn drivers that they are approaching a school zone where children may be present.
  • School bus stop signs alert drivers to stops that may be hidden by terrain or the roadway.
  • School speed limit signs keep traffic moving slowly.

Regardless of the purpose, all school-related signs must be highly reflective, so they are clearly visible during the hours of dawn, dusk, dark and as well as during the day. They must also be durable and cost-effective.

When you purchase our signs you get the most reliable and effective reflective signs made. That's because we use 3M™ Reflective Sheetings.

Back to top

Delivering Safety on Rural Roads

Although accidents are more likely to happen in urban areas, they are more likely to be fatal on rural roads. An effective signing program can help increase safety and decrease the possibility of accidents. However, to be effective, a signage program must meet the special requirements that a rural setting demands.

Many types of highway signs are mounted on curves or the left hand shoulder where headlights do not strike them directly. To ensure that they are easily seen by motorists, the signs must perform at wide angles to allow the driver to view them from an indirect approach.

Darkness is a critical factor because rural roads are typically not lit. Even drivers who know rural roadways well, may have trouble negotiating them at night. That is because visual cues that motorists rely on for 90-95% of their driving information disappear in the dark. Daytime driving can be hazardous too, when poor weather impairs visibility. So, signs in rural areas must be very bright in order to give drivers clear direction under poor visibility conditions.Night Time Rural Driving

For maximum safety on rural roadways, you should select signs that are designed to deliver exceptional brightness and angularity. Our signs not only meet those key requirements, they're also very durable for cost-effectiveness and long-lasting safety. This is because we use only the finest materials for sign construction.

When you purchase our signs you get the most reliable and effective reflective signs made. That's because we use 3M™ Reflective Sheetings.

Back to top

Sight Distance

Since rural roads are generally traveled at higher speeds, motorists need as much reaction time as possible. For instance, when traveling at a speed of 60 mph, the average driver needs up to 125 feet to identify a sign and respond accordingly. That's why signs must be placed correctly and must be readable from long distances.

Decision sight-distance model: new research figures show the actual time required for drivers to make decisions and complete safe maneuvers.

Visible Driver "Sees", Recognizes Hazard, Decides on Action, Initiates Action, Completes Maneuver
Speed Time Distance
30 MPH 10.5 406 Feet
60 MPH 14.5 1275 Feet

Night Vision: Over 1/3 of America's driving population is over 60. As our population ages, the need for more visible signs increases - especially at night. Older drivers have only 65 to 77% of the legibility distance of younger drivers at night.

Light to See at Night

Back to top

Bicycle RoutesBike Route Sign

Regardless of their individual messages, all bicycle path/route signs should meet the same requirements. They must be bright and clearly visible day and night, because the most dangerous times are during the hours of dawn, dusk and dark. Signs should also be durable in order to provide years of guidance for everyone sharing the roadways.

Our signs give you the long-lasting brightness you need, for high visibility around the clock - because the are made using 3M'™ Reflective Sheetings.

Back to top

Reflectivity / Entrance or Observation Angle / Luminance

If you want information on any of the above, please contact us.

Back to top

Caps, Rods & Crosspieces

Lyle Signs, Inc offers the purchase of caps, rods & crosspieces for the AL-Series Bracket and the E450 brackets.

The AL-Series caps & crosspieces are available in aluminum. They are available for 6 & 9" Flat or 9" Extruded plates. Below are samples of the AL-Series Caps & Crosspieces.

(Click on the images below to view a slide show.)

Plate Type/Slot Length

90° Xpiece

Round Cap

U-Channel Cap

Flat 5-1/4" Slot

AL808CF

AL808RF

AL808UF

Extruded 5-1/4" Slot

AL808CE

AL808RE

AL808UE

Flat 12" Slot

AL812CF

AL812RF

AL812UF

Extruded 12" Slot

AL812CE

AL812RE

AL812UE

 

Below is an image showing the E-Series bracket parts that can be ordered. They are available for 6 & 9" Flat or 9" Extruded plates.

Ornamental Nut

Plate Holder

5/8" Square Rod

Post Cap

Ornamental Top Nut

PlateHolder

Square Center Road

Post Cap

 

Search Our Site

Search Catalog